大白肥妇bbvbbw高潮,亚洲 国产 日韩 在线 一区,扒开少年白嫩的屁股动态图,和60岁女人做下面好松

您好,歡迎光臨浙江羅星實(shí)業(yè)有限公司官網(wǎng)!
咨詢熱線:0573-84751572 | Chinese  |  | English


產(chǎn)品分類

Contact us

contact us

Zhejiang Luoxing Industrial Co., Ltd

TEL:0573-84751572

Fax:0573-84751571

Contact: manager Yao

Cellphone:13004207588

Web:http://m.ikaratruyen.com/

Zip code:314000

E-mail: jxdongjing@163.com

No. 369, Bujiao road, Daqiao

town,Nanhu district, Jiaxing city, Zhejiang province

high solid&non-solve

6080PN-3-Z high solid resin (special two component liquid)

6080PN-3-Z high solid resin (special two component liquid)

Details :

6080PN-3-Z high solid resin (special two component liquid)

1.Application : high thickness, for mid layer

2.Product data

Appearancelight yellow transparent sticky liquid

SolventDMF

Viscosity (mPa·s/25℃)8000±2000

Solid content(%)952

100% M.Dkg/cm2):20

Tensile strengthkg/cm2):280

Elongation%):400

3.Property

①Can be used for long-time production, and the viscosity changes little, thick film coating effect is good.

②Film properties: hydrolysis resistance, heat resistance softening(not suitable for embossing), low temperature property is good

4.Operation

6080PN-3-Z:100      

6140G :8

Special pigment: 0-5

6140G is the special curing agent for 6080PN-3-Z, the proportion is 100:8

140Drying for 3 minuteslamination with 335 base material130drying for 3-5 minutes

5. Notes

 1.Adjust the proportion of 6080PN-3-Z and 6140G can influence the speed and strength of getting film

2.6080PN-3-Z ,6140G are high solid products, with low temperature can not flow, please use them at 20-30℃。

3.This product need special non solvent pigment

4.In winter, it is better used in 30℃±5. When warming the temperature can not over 60℃,because stir for long time the viscous will be low, and the material will cross link.

5. 300g/m2  coating, the oven temperature usually be 120*1min+135*1min+145*1min. When drying, please keep the volume of air in the oven consistent, to avoid the phenomenon of different curing speed.

Different coating amount should be different mins: 0.25mm should be 3.5mins, 0.15mm should be 3mins, 0.075should be 2.5mins

6.The surface resin we recommend our product 335(one component bottom liquid)

7.This product easy to have bubbles, so it need special defoaming agent. And use the defoaming agent at the beginning of drying time.

 

 


Details

6080PN-3-Z high solid resin (special two component liquid)

1.Application : high thickness, for mid layer

2.Product data

Appearancelight yellow transparent sticky liquid

SolventDMF

Viscosity (mPa·s/25℃)8000±2000

Solid content(%)952

100% M.Dkg/cm2):20

Tensile strengthkg/cm2):280

Elongation%):400

3.Property

①Can be used for long-time production, and the viscosity changes little, thick film coating effect is good.

②Film properties: hydrolysis resistance, heat resistance softening(not suitable for embossing), low temperature property is good

4.Operation

6080PN-3-Z:100      

6140G :8

Special pigment: 0-5

6140G is the special curing agent for 6080PN-3-Z, the proportion is 100:8

140Drying for 3 minuteslamination with 335 base material130drying for 3-5 minutes

5. Notes

 1.Adjust the proportion of 6080PN-3-Z and 6140G can influence the speed and strength of getting film

2.6080PN-3-Z ,6140G are high solid products, with low temperature can not flow, please use them at 20-30℃。

3.This product need special non solvent pigment

4.In winter, it is better used in 30℃±5. When warming the temperature can not over 60℃,because stir for long time the viscous will be low, and the material will cross link.

5. 300g/m2  coating, the oven temperature usually be 120*1min+135*1min+145*1min. When drying, please keep the volume of air in the oven consistent, to avoid the phenomenon of different curing speed.

Different coating amount should be different mins: 0.25mm should be 3.5mins, 0.15mm should be 3mins, 0.075should be 2.5mins

6.The surface resin we recommend our product 335(one component bottom liquid)

7.This product easy to have bubbles, so it need special defoaming agent. And use the defoaming agent at the beginning of drying time.

 

 


分享按鈕
精品国产乱码一区二区三区| cao死你小sao货湿透了np| 村长压在小萍身上耕耘着| 精品人妻人人爽久久爽av蜜桃| 美女直播全婐app免费| 天天夜夜草草久久伊人69堂| csgo未满十八岁能玩多久| 律师事务所在线咨询免费| 亚洲av成人片色在线观看高潮| 日本三级在线播放| 欧美性xxxxx极品少妇小说| 娇小小小泬xxxx护士| 亚洲国产成人久久精品大牛影视 | 曰本无码人妻丰满熟妇啪啪| 一本久道久久综合狠狠躁| 狂躁女人双腿流白色液体| 精品国产一区二区三区四区| 野外被三个男人躁一夜小说 | cekc妇女毛多啊bn| 国产精品久久久久久久久久直播| a片免费| 免费萌白酱国产一区二区三区| gogo全球专业高清摄影| 成人国产片女人爽到高潮| 女性全捰艺术照摄影| 女人被男人吃奶到高潮| 久久国产精品波多野结衣av| 真人做愛三級片| 校花醉酒后被乞丐进入| av免费网站在线观看| 美女直播全婐APP免费| 女人第一次一进去就出血| 把高冷校花压在桌上进进出| 亚洲日本va中文字幕| 中学生广播体操舞动青春| 无码人妻一区二区三区| 俺去俺来也在线www色官网| 波多野中文无码av人妻系列视频| 国产寡妇xxxx猛交| 邻居老头把我弄舒服死了| 偷拍55位美女撒尿BBB毛洗澡|